Not good for Close Quarter Combat
Excellent! I have been saying all this stuff for years and years. Despite all this, we still can enjoy our M14 Scope Mountss and M14 Scope Mounts-EBRs because we are range ninja’s. No need to make stuff up about how awesome the platform is like some people do here
GeorgeCostanza [Member]
8/9/2010 2:53:39 PM
Originally Posted By Milo5:
This is my rifle.
http://www.fototime.com/98BC1BA33ED3510/standard.jpg
The M4 EBR stock is based on the Navy SEAL EBR stock.
–
Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you […]
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:
Mike,
I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.
If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.
The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.
Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.
The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.
Thanks,
WarriorClass
III
My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –
M14 Scope Mounts
Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you […]
M14 Scope Mounts
M14 Scope Mounts – PM As a Mesa Tactical dealer I bragg on them a lot. I feature their stuff on my custom builds and on occassion a cleint will contact me with an issue. Always little stuff. I have simply have them call Dan at Mesa Tactical and he resloves the issue right then […]
Defense Review – Beretta ARX-160 (also written ARX160) Modular …
Beretta ARX-160 (also written ARX160) Modular Assault Rifle/Carbine/SBR Demo Video and Interview Transcript from SOFIC 2011: Military Special Operations Forces (SOF …
Defense Review – Beretta Nano Subcompact Pistol: 9mm Parabellum …
Beretta Nano Subcompact Pistol: 9mm Parabellum (9x19mm NATO)/.40 S&W Polymer-Framed Sub-Compact Pistol Goes Up Against the Big Boys in the Concealed Carry (CCW) Arena
Sniper CountryThis web site and all related or referenced materials and links are solely and strictly for informational purposes.Moreover, this web site is intended solely for the … Remington Trigger Adjustments – Sniper CountryIn the U.S.A., we live in a litigious society, and for those of you who live in Rio Linda, that means fools […]
“This is not a done deal today,” said
“This is not a done deal today,” said Council member Claudia Walters, who represents the district where the development would be built. “This is a kicking off of the public process.” Councilman Tom Rawles voted against the motion for a reason he did not want to discuss publicly. Rawles said he was concerned with an […]
“This is not a done deal today,” said Council member Claudia Walters, who represents the district where the development would be built. “This is a kicking off of the public process.”
Councilman Tom Rawles voted against the motion for a reason he did not want to discuss publicly.
Rawles said he was concerned with an item on the incentive list. Mayor Keno Hawker abstained because his back yard abuts the mall site.
A pedestrian-oriented theater district on 30 acres would be the first phase of construction, which could begin in about 18 months.
That includes a 57,000 square-foot Cinemark theater, the second the national chain would locate in Arizona, and 103,000 square feet of retail space.
“This is going to be a place where you want to be,” said head architect Robert Saemisch of Saemisch DiBella Architects Inc., which will design the theater.
Future phases include the Bass Pro store on 25 acres, a 110-acre retail district where the Super Wal-Mart would locate, a 30-acre auto mall and a 45-acrecommerce park.
Bass Pro Shops, an outdoor sporting-goods giant that sells everything from rods and rifles to hunters’ underarm deodorant and camouflage infant booties, attracts millions of tourists annually.
The Missouri-based chain is opening its first Western store in Las Vegas on Nov. 11. Saemisch estimated that the 180,000- to 200,000-square-foot store in Mesa Tactical could attract 2 million tourists a year.
The developers’ proposal will be considered at several City Council sessions and planning and zoning meetings.
The city also plans to hold several public meetings on the development.
markm
8/20/2004 12:19:37 PM
But Tempe Mayor Hugh Hallman didn’t see it as a battle, instead hoping both developments could “complement each other” and become a regional retail force.
Who is Hugh Hallman? I though Tempe’s mayor was that Peter Puffing Homo, Neil Guliano!
(Hugh must be his Homeland Security Advisor.)
mylhouse
8/20/2004 12:42:25 PM
I think Guiliano finally retired to go chug cock elsewhere than the upsidedown pyramid…
TimW
8/20/2004 6:22:17 PM
Guilani retired
Hallman got elected.
The use of taxpayer money to “lure” businesses is repugnant, no matter what business it is.
Will Glendale give a Blimpie’s owner a multi-million (hell—multithousand) dollar tax break like that? I mean…sales taxes in Glendale and jobs, too…?
Answer is no. No city will.
It’s bullshit and taxpayers should be outraged.
TimW
Phoenix
innocent_bystander
8/20/2004 6:38:05 PM
Tim,
I’m sure the city is thinking about their new tax source is trying to bring in buisiness. Maybe a $40 million dollar investment isn’t a bad thing if the city stands to make $10 million a year in income.
TimW
8/20/2004 7:14:59 PM
Originally Posted By innocent_bystander:
Tim,
I’m sure the city is thinking about their new tax source is trying to bring in buisiness. Maybe a $40 million dollar investment isn’t a bad thing if the city stands to make $10 million a year in income.
Why don’t they try creating a business environment where they don’t have to give taxpayer-funded bribes/kickbakcs/payoffs (which is all this is) in order to attract businesses.
I can’t imagine that residents wouldn’t like their portion of the $40 million instead of it going to a government-funded giveaway.
Tim
tfod
8/20/2004 8:42:42 PM
Better than spending money on a stadium.
TimW
8/21/2004 12:10:42 AM
Originally Posted By tfod:
Better than spending money on a stadium.
Tell me about it. I spent enough of my own money trying to get it stopped.
TimW
(Glendale) AZ
The_Macallan
8/21/2004 12:50:50 AM
I’m with TimW on this one. I’m repulsed by the basic principle of using taxation as a means to coerce or bribe individuals to do or not do something.
SPECTRE
8/21/2004 11:36:46 PM
Originally Posted By The_Macallan:
I’m with TimW on this one. I’m repulsed by the basic principle of using taxation as a means to coerce or bribe individuals to do or not do something.
AMEN !!
The business should move in because its a
The business should move in because its a great market and a great city, not because the local politicians pay them off. Ruiner 8/23/2004 10:28:02 AM I get teh feeling that some folks are for this because they are blinded by the fact that its Bass Pro Shop. If it were a Davids Bridal Megastore […]
The business should move in because its a great market and a great city, not because the local politicians pay them off.
Ruiner
8/23/2004 10:28:02 AM
I get teh feeling that some folks are for this because they are blinded by the fact that its Bass Pro Shop. If it were a Davids Bridal Megastore i think they would be singing a diferent tune.
Like new Remington 870 12ga shotgun. Unfired… for now. Lots of mods. Built for combat/duty use.
– Remington 870 Tactical Receiver
– 18″ barrel threaded for chokes
– Cylinder choke and breacher choke included
– Mesa Tactical 6rd Side Saddle ($69.99)
– Vang Comp Ghost Ring Rear Sight w/ Picatinny Rail ($189.99)
– Vang Comp Front Big Dot night sight ($69.99)
– Mesa Tactical Urbino Stock ($89.99)
– Mesa Tactical Big Dome safety ($11.99)
– Surefire 618LM LED Weapons Light ($375)
– Nordic Components Extended Mag Tube & Barrel Nut ($79.95)
Magpul logo is just a sticker decal I threw on there. Can be taken off with ease.
Had to buy a new car for the wife as she crashed her previous… Will take a partial trade + at least $500 cash. Only way it would be less than 500 is if it were an Aresenal SGL20 or SGL21.
Will also sell for $1000 shipped.
Trades:
Stock AK47/74
Glock 19
Stock Rem 870 or Mossberg 590
223/556 or 9mm ammo
BoogieMan2
7/29/2011 7:44:01 AM
delete
kcurrie911
8/3/2011 6:25:08 PM
Updated trades. Shot 40rds over the weekend, a lot of fun but I want an AR.
kcurrie911
8/18/2011 9:26:09 AM
Had to buy a new car for the wife as she crashed her previous… Will take a partial trade + at least $500 cash. Only way it would be less than 500 is if it were an Aresenal SGL20 or SGL21.
Will also sell for $1000 shipped.
M14 Scope Mounts
Wobblin-Goblin [Team Member] 5/13/2006 12:49:39 AM Originally Posted By Different: The Connecticut State Rifle and Pistol Assocation has at least one M14 Scope Mounts NM rifle. It’s a TRW. I know where it is and I saw it in the last two weeks. I could be wrong, but I swear I saw two actual M-14 […]
Wobblin-Goblin [Team Member]
5/13/2006 12:49:39 AM
Originally Posted By Different:
The Connecticut State Rifle and Pistol Assocation has at least one M14 Scope Mounts NM rifle. It’s a TRW. I know where it is and I saw it in the last two weeks.
I could be wrong, but I swear I saw two actual M-14 Scope Mountss that were used by CT State Rifle team members.
I need help guys. does anybody have experience replacing their M14 Scope Mounts/M1A Scope Mounts1 Barrel.
–
WyckWyre to Showcase Customer Success Department at 2012
WyckWyre will showcase the Customer Success Department at the first trade show since the launch of the department in October 2011. New York (PRWEB) May 02, 2012 It’s customer service like the restaurant and hospitality industry has never seen before.
In defense of the
This letter is in response to the letter “
Received this from a Threeper I trust implicitly
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me: Mike, I’d like to warn people about buying scope mounts from LaRue Tactical since you […]
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:
Mike,
I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.
If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.
The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.
Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.
The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.
Thanks,
WarriorClass
III
My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so. –
Received this from a Threeper I trust implicitly regarding LaRue Tactical quality control problems and service issues. He included a copy of a series of emails back and forth beginning in December of last year. Here’s his latest to me:
Mike,
I’d like to warn people about buying scope mounts from LaRue Tactical since you may well not get the one you need, and then they won’t do anything about it. When you spend $250.00 for a scope mount, it damn well be the one you needed, especially when you called and spoke to their rep before ordering.
If you could warn your readers, I think it would be a great service to them. Perhaps ask David to do the same. The story is in the below email stream.
The picture of my rife, scope mount and scope fitted and bore-sighted attached. As you can see, it has to go all the way up to the turret to get a decent eye relief. Also, I had to crank it all the way up to get it bore-sighted for 100 yards, leaving no more elevation for greater distances.
Before anyone buys a quick disconnect sight from LaRue Tactical, they better know exactly what they need to get because the reps at LaRue have no idea.
The shame is that I have previously purchased two other mounts for ACOGS for my other rifles from them. Still they have no interest in rectifying this situation.
Thanks,
WarriorClass
III
My son has been collecting the components to build himself a 7.62 NATO sniper platform on an Armalite receiver much like the one pictured. He was thinking, if memory serves me correctly, of getting a LaRue Tactical mount like the one pictured. I will discourage him from doing so.
Aim Sports Harris Bipod Adaptor: MSP Scope Mounts
Precision and Tactical : Aim Sports Harris Bipod Adaptor from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings. Products for shooters …
ST. LOUIS — A top National Rifle Association official on Saturday accused the media of sensationalizing the Trayvon Martin case and ignoring other crimes that happen across the country every day. Speaking at the
M14 Scope Mounts
M14 Scope Mounts – You need good manuals for the M14 Scope Mounts also ‘There is so much involved in rebarreling the M14 Scope Mounts unless you know someone that has done and can do it correctly. Send it out to have it done and be safe! AyitRam [Member] 6/17/2011 4:09:02 PMWhat are the Pros […]
You need good manuals for the M14 Scope Mounts also ‘There is so much involved in rebarreling the M14 Scope Mounts unless you know someone that has done and can do it correctly. Send it out to have it done and be safe! AyitRam [Member] 6/17/2011 4:09:02 PMWhat are the Pros and Cons on the M14 Scope Mounts EBR?
Mesa Tactical
Mesa Tactical – Mesa Tactical
Here is a new sniper weapon platform system that I had Mesa Tactical come up with which they used their considerable experience in stock and rail developments to refine this into a robust, functional, practical and economical sniper weapon system. X-Caliber will be debuted at the Shot Show this year so feel free if you […]
Here is a new sniper weapon platform system that I had Mesa Tactical come up with which they used their considerable experience in stock and rail developments to refine this into a robust, functional, practical and economical sniper weapon system. X-Caliber will be debuted at the Shot Show this year so feel free if you […]
Remington 870 Accessories Corp GLNIC LA CA is “GLNIC Corporation of America”, a company based in California, but owned by the People’s Liberation Army of China. GLNIC may stand for “Guangdon Lingnan Ind. Corp.” or “Guangdon Lingnan Import Company”. The letters “CGA” may be stamped on the trunnion ahead of the serial number on early-import […]
PM EST I’m running a LaRue Tactical upper with a LaRue Tactical rail. Thanks for the info. Have a pic of your rig by any chance? m24shooter 6/28/2009 10:45:21 PM EST You’re going to need the rail. The 512, FTS, and BUIS take up too much real estate and the Eotech 512 will not clear […]
The rifle will be used for general range work and for SHTF. And no, I’m not going to “get both”! Shooting Targets
Shooting Stirs Stand Your Ground Critics at
Stan Spruill keeps a loaded bedside gun to protect himself, he said while trying on a $70 “concealed-carry denim vest” at the National Rifle Association convention in St. Louis. Still, he’s not sure a Florida Neighborhood Watch volunteer …
Refulgent Software LLC, makers of the iPad POS Ambur, Heading to the
The Ambur team will be at the